|
|
| Heat
Exchangers
|
 |
| NGC,s line of heat
exchangers have been used for corrosive chemicals at elevated
temperatures (including HF, HCL, HNO3, and H2SO4). The all
fluoropolymer wetted surface virtually eliminates the
possibility of contamination. Furthermore, the tubes are
individually welded to the tube sheet, thereby minimizing the
chance for leakage as compared to "heat shrink" or
"honeycomb"
welded tubes.
Benefits
- Shell & tube or tank & coil design.
- Carbon steel or stainless steel shells.
- Optional NGC PTFE or PFA fluoropolymer lining.
- PFA / PTFE fluoropolymer internal wetted surfaces.
- Temperatures to 300°F (150°C).
- Heat duties to 500,000 BTU/hr (125 Kcal/Hr)
|
|
